Fisher & Paykel Brevida Fit Pack

• The AirPillow Seal inflates to form a gentle ‘pillow’ of air and seals in and around the nose.
• Simple, adjustable headgear to deliver an individual fit and is designed to stay in place during sleep.
• The diffuser, which reduces noise and air draft, is washable and durable.
• Blue highlights incorporated into the mask key components assists you with daily mask use.

Fitting Guide:

1. Use fingers to gently spread the soft wings of the Silicone Seal and guide silicone openings into your nostrils.
2. Hold the mask frame in position with one hand and pull the headgear over your head with your other hand.
3. Gently loosen the headgear straps until a comfortable seal is achieved, then slightly tighten and fasten your headgear.

Fitting tips:

• Connect your mask to your CPAP hose and turn your device on.
• Check to make sure your silicone seal (cushion) has inflated with air.
• Check that the silicone openings are not inverted. If they are, gently ‘flick’ them out with one finger.
• Be gentle when spreading the soft side wings; do not use finger nails.
• Once the silicone openings are placed into the nostrils, put one hand on the strap labelled “Brevida”  and pull over your head.  The upper and lower strap should be spread open so that the Headgear sits securely on the head.
• If you experience any leaks after fitting your mask, you may need to lift the Silicone Seal off your nose and reposition it again so that the two silicone openings fit securely into your nostrils.
• Ensure the headgear straps are not fastened too tightly.  The Silicone Seal should feel secure in the nostrils, but not too tight.