Fisher & Paykel Eson Nasal Mask

Description

To find the right size for you; click on the following sizing guide link.

Additional Features:

• RollFit Seal: The one-piece seal ‘rolls’ back and forth on the bridge of the nose to adjust automatically. In doing so, the RollFit Technology reduces pressure on the bridge of the nose.
• ErgoFit Headgear: This breathable, ergonomically designed headgear has been designed to self-locate high on the rear of the head allowing for head movement (sideways, up and down).
• Easy Frame: This low-profile frame is stable, durable and small, and ensures a clear line of sight. The one frame fits all three seal sizes and has an Easy-Clip frame attachment to aid assembly after cleaning.

Fitting your mask:

1. Remove all packaging before using your mask.
2. Hold open the bottom straps of the headgear with the mask frame facing down
3. Guide the headgear over your head so that the silicone seal is resting on your forehead
4. Place your hands on the bottom straps on either side of the mask frame and pull out and downwards. Ensure the silicone seal rests over your nose and the blue strap sitting on your forehead.
5. Gently tighten the headgear straps of the mask headgear starting with the blue forehead straps followed by the bottom straps.

Tips:

1. If you are experiencing leaks during therapy, lift the mask slightly away from your nose and reposition it again.
2. Ensure the mask headgear straps are not fastened too tightly.
3. The forehead straps should sit horizontally on the forehead, just above the ears.

Cleaning tips (outlined by the American Thoracic Society April 2020):

• Daily: clean nasal mask cushion daily with a damp cloth and mild detergent, may use mask wipes
• Weekly: clean full mask system (including headgear) with warm water and mild soap (dish soap). Rinse with water and then air dry away from direct sunlight.

Recommended replacement every 6 months.