ResMed AirFit F30I Non-Magnetic

Description

Fitting Guide:

1. With one hand holding the bottom of the cushion and the other holding the conduit frame, position the mask in front of the face.
2. Place the cushion under the hose and against the face. With the ResMed logo and headgear facing up, pull the headgear over the head.
3. Bring the lower headgear straps under the ears and attach the magnetic clips to the frame connectors.
4. Undo the fastening tabs on the upper headgear straps and pull evenly.
5. Repeat step 4 with the lower headgear straps.
6. Squeeze the side buttons on the elbow and detach it from the frame.  Connect the air tube from your device to the elbow and then reattach it to the frame on top of your head.

Cleaning tips (outlined by the American Thoracic Society April 2020):

• Daily: clean full face mask cushion daily with a damp cloth and mild detergent, may use mask wipes
• Weekly: clean full mask system (including headgear) with warm water and mild soap (dish soap). Rinse with water and then air dry away from direct sunlight.

Recommended replacement every 6 months.