ResMed Mirage Activa LT

Description

Fitting Guide:

1. Turn the forehead dial to position 24 so that the forehead support is fully extended.
2. Disconnect the lower headgear clip, hold the mask over the nose and pull the headgear over the head.
3. Reconnect the lower headgear clip, ensuring that it clicks into place.
4. Allow room for the cushion to inflate by using two fingers as a guide. Insert two fingers under the lower headgear and allow them to move freely.
5. Turn the flow generator on.
6. While lying down, adjust the forehead dial for comfort and seal

Fitting Tips:

• While the device is turned on, pull the mask away from your nose to allow for the cushion to re-inflate; then adjust the headgear straps. Never over tighten your headgear straps.

Cleaning tips (outlined by the American Thoracic Society April 2020):

• Daily: clean nasal mask cushion daily with a damp cloth and mild detergent, may use mask wipes
• Weekly: clean full mask system (including headgear) with warm water and mild soap (dish soap). Rinse with water and then air dry away from direct sunlight.

Recommended replacement every 6 months.