ResMed Mirage Quattro

Description

Fitting Guide:

1. Turn the forehead pad dial to position 24, where the forehead support is fully extended.
2. Disconnect one headgear clip, place the mask on your face and pull the headgear over your head.
3. Bring the lower straps below your ears.  Fasten the lower headgear clip, ensuring that it clicks into place.
4. Unfasten the Velcro tabs and pull the upper headgear straps evenly until comfortable. Do not over tighten.
5. Unfasten the Velcro tabs and pull the lower headgear straps evenly until comfortable. Do no over tighten.
6. Connect the device air tubing to the swivel connector.  Turn your device on.  Turn the forehead dial until the mask is even and comfortable on your face.  If leaks are experienced during therapy, re-adjust the headgear (steps 4 and 5).

Fitting Tip:

1. While the device is turn on, pull the mask away from your face a short distance to allow the cushion to re-inflate; then adjust your headgear straps.
2. Do not over tighten your headgear straps.

Cleaning tips (outlined by the American Thoracic Society April 2020):

• Daily: clean full face mask cushion daily with a damp cloth and mild detergent, may use mask wipes
• Weekly: clean full mask system (including headgear) with warm water and mild soap (dish soap). Rinse with water and then air dry away from direct sunlight.

Recommended replacement every 6 months.