ResMed Mirage Swift II

Description

Additional Features:

• Air vent directs air quietly and gently away from the patient and bed partner.
• The mask’s lightweight design makes it easy to handle and unobtrusive to wear.
• Four interchangeable tube positions (up, down, left or right) offer flexibility, comfort and more sleeping positions.
• The Mirage Swift II is designed to fit a wide range of facial and nasal structures.

Fitting Guide:

1. Put the headgear on your head and place the nasal pillows below your nose.  Make sure the top strap passes over the top of your head.  Make sure the ResMed logo on the pillow sleeve faces outward; away from your face.
2. Insert the nasal pillows into your nostrils.  Gently tighten the headgear straps; first the back straps and then the top straps.  Alternate the adjustment of each set of straps so that the head panels rest between the eye and the ear.  The pillow sleeve should rest comfortably above your upper lip.
3. Adjust the angle of the nasal pillows.  To do this, rotate the pillow sleeve assembly forward or backward so that the nasal pillows sit comfortably inside your nostrils.
4. You can use the optional tube retainer if you prefer to have the short tube assembly secured to the headgear in the up position.
5. The short tube assembly can be attached in four different ways.  Note: the short tube assembly and cap can be connected to either side of the pillow sleeve.
6. Connect one end of the main air tubing to your flow generator and the other end to the swivel.  Turn your flow generator on.

Note: if you feel air leaks; readjust the angle of the nasal pillows to get a better seal.  You may need to readjust the headgear straps.  Do not over tighten the headgear straps.  If you are unable to resolve any leaks you may need an alternative pillow sleeve size.

Cleaning tips (outlined by the American Thoracic Society April 2020):

• Daily: clean nasal pillow cushion daily with a damp cloth and mild detergent, may use mask wipes
• Weekly: clean full mask system (including headgear) with warm water and mild soap (dish soap). Rinse with water and then air dry away from direct sunlight.

Recommended replacement every 6 months.