ResMed Swift FX Nano

Description

Additional Features:

• This mask has the open, streamlined design of a nasal pillow mask with the comfort of a nasal mask.
• The mask comes with a minimalistic design.  There is no need for rigid frames or forehead support with the two-point headgear.
• The modified dual wall nasal cushion provides a supportive seal with greater flexibility while the quiet vent gently distributes air away from you and your partner.
• The elbow rotates 360 degrees to accommodate various sleeping positions.  It’s Spring-flex tubing and the dual swivel reduce pull on the mask.  Swift FX Nano’s cushion tab hinges add flexibility to compensate for additional movement.

Fitting Guide:

1. Ensure that the bottom of the cushion opening is aligned with the bottom of your nose.  Place the mask over your nose.
2. Pull the headgear over your head.  The buckle on the top strap should sit on top of your head and the fabric back strap should go around the back of your head.
3. Adjust the top strap by pulling the strap through the buckle, one notch at a time.  Do not over tighten.  The mask should sit comfortably over your nose and the back strap should sit just above your ears.
4. Adjust the fasteners on the fabric back strap until the mask is comfortably sealed.  The fabric back strap can be positioned over or under the hair.
5. Adjust the mask cushion until it sits comfortably on your nose.
6. Finally, connect the free end of the short tube assembly to the device air tubing.  If the mask leaks, readjust the fabric back strap before the top strap.

Cleaning tips (outlined by the American Thoracic Society April 2020):

• Daily: clean nasal mask cushion daily with a damp cloth and mild detergent, may use mask wipes
• Weekly: clean full mask system (including headgear) with warm water and mild soap (dish soap). Rinse with water and then air dry away from direct sunlight.

Recommended replacement every 6 months.