ResMed Ultra Mirage II

Description

Features:

• The two-layer cushion provides optimal comfort, excellent stability and minimizes pressure on the bridge of your nose.
• The headgear release clips allow easy removal of mask and eliminates the need for regular readjustment.
• The forehead support provides excellent fit and stability, and can be easily adjusted while you’re wearing the mask.
• The cushion clip ensures that the cushion has maximum stability.
• Quick release swivel allows easy removal of the air tubing from the mask.
• The super quiet air vent minimizes noise and enables efficient carbon dioxide release. The vented air is channeled along the air tubing so that it doesn’t disturb you or your partner.
• The 360 degree elbow rotation gives you control over air tubing orientation.

Fitting Guide:

1. Push the air tubing all the way onto the swivel.  The end of the air tubing and the ridge of the swivel must completely meet.  Connect the other end of the air tubing to your flow generator.
2. Place the cushion over your nose, pull the headgear over your head and make the straps pass below your ears.  Connect the other headgear clip to the mask frame.  Use the Velcro straps to adjust the fit of the headgear.  Do not over tighten the straps.
3. The pads of the forehead support should lightly touch your forehead when the mask is in place.  Adjust the forehead support if required, by moving it to one of the other tab positions.  There are four tab positions.  To change a tab position, first, loosen the headgear straps.  Then, press the forehead support tab and move it upwards to the next position.  Once again, gently tighten the headgear straps.
4. Grasp the edges of the vent cover on both sides of the “Click” sticker at the same time.  Firmly push the vent cover onto the mask elbow to make sure it is clicked securely in place.
5. Turn the flow generator on.  Lie down and check that the mask is comfortable and there are no air leaks.  If there are air leaks, you may need to readjust the Velcro straps (step 2) or forehead support (step 3).

Cleaning tips (outlined by the American Thoracic Society April 2020):

• Daily: clean nasal mask cushion daily with a damp cloth and mild detergent, may use mask wipes
• Weekly: clean full mask system (including headgear) with warm water and mild soap (dish soap). Rinse with water and then air dry away from direct sunlight.

Recommended replacement every 6 months.