Respironics DreamWear Full Face Mask

Description

Additional Features:

• Compact cushion creates an open field of vision.
• Unique hose connection- great for side sleepers.
• Minimalistic design with fewer parts.
• Hollow frame with supportive headgear.
• Magnetic bottom clips.

CLICK HERE for the DreamWear Fitting Guide

Fitting Guide:

1. The cushion opening will be directly under the nostrils.  The cushion will hug the nose and mouth, and leak will be minimal. (Note: at no time should the nose be inside of the cushion opening.  If any part of the cushion overlaps the nose, the cushion is being worn incorrectly.  A different size cushion may be needed.)
2. With the mask assembled, place the cushion under the nose.
3. Position the frame on the top of your head.  Pull the headgear over the back of the head.
4. Attach the magnetic headgear clips to the mask cushion.
5. To adjust the mask, peel the headgear tabs away from the fabric.  Adjust the length of the top straps. Press the tabs back against the fabric to reattach.  Repeat this step with the bottom straps. (Note: do not over tighten the headgear.)
6. Position the mask until it fits comfortably.  When finished, the elbow should rest at the top of the head.

Cleaning tips (outlined by the American Thoracic Society April 2020):

• Daily: clean the full face mask cushion daily with a damp cloth and mild detergent, may use mask wipes
• Weekly: clean full mask system (including headgear) with warm water and mild soap (dish soap). Rinse with water and then air dry away from direct sunlight.

Recommended replacement every 6 months.